Here is the answer to the first question: The work would be a wall-mounted relief sculpture, approximately 30 cm high, created using assemblage and construction techniques. The theme "Amusement for rehabilitation centre" would be expressed through a vibrant arrangement of diverse found objects (e.g., colorful plastic caps, polished stones, small metal gears, fabric scraps, old keys). These objects would be carefully selected and arranged to form an abstract, visually stimulating pattern or a playful scene, aiming to evoke curiosity and positive engagement. To give an appropriate finish to the work: • All found objects would be thoroughly cleaned to remove dirt, rust, or grime. • Any sharp edges would be filed or sanded down to ensure the artwork is safe for a rehabilitation environment. • Objects would be securely attached to a sturdy backing (e.g., a reclaimed wooden board or metal sheet) using strong, durable, and non-toxic adhesives (like epoxy) or mechanical fasteners (small screws, wires) where appropriate. • A final coat of clear, non-toxic acrylic sealant or varnish would be applied over the entire piece. This finish would protect the materials from dust, moisture, and wear, unify the appearance of the disparate objects, and provide a subtle sheen that enhances their textures and colors, ensuring longevity and ease of maintenance in a public setting. That's 2 down. 3 left today — send the next one.