What is used to control suspended loads? Which of the following is the primary purpose of conducting a job hazard analysis (JHA)? What is your Role and Responsibility at site? We use toe board to prot

Here are the answers to your questions:

6. What is used to control suspended loads?
To control suspended loads, various equipment is used depending on the specific task. Slings and shackles are used for lifting, while tag lines are used to control the load's swing and rotation. Guys are also used for stability. Therefore, all the listed options contribute to controlling suspended loads.
The correct option is e).

e) All the above.

7. Which of the following is the primary purpose of conducting a job hazard analysis (JHA)?
A Job Hazard Analysis (JHA) is a systematic process used to identify potential hazards associated with a specific job task. By identifying these hazards, appropriate control measures can be put in place to prevent accidents and injuries.
The correct option is c).

c) To identify potential hazards associated with a specific job task.

8. What is your Role and Responsibility at site?
As a Contractor Supervisor/Engineer, key responsibilities typically include:

• Safety Compliance: Ensuring all workers adhere to safety protocols and procedures.
• Work Supervision: Monitoring the quality and progress of engineering tasks.
• Risk Management: Conducting daily Tool Box Talks (TBT) and ensuring Job Hazard Analyses (JHAs) are implemented.

9. We use toe board to protect......... from falling.
Toe boards are installed at the base of guardrails on elevated platforms to prevent materials, tools, and other objects from falling off the edge and potentially striking someone below.
The correct option is b).

b) Material.

10. What is the correct procedure to de-energize an electric circuit?
The correct procedure to de-energize an electric circuit, often referred to as Lockout/Tagout (LOTO), involves a specific sequence to ensure safety. This sequence is typically: Lock the energy source, Tag it to indicate it's locked out, Try to operate the equipment to verify it's de-energized, and then Clear the area or perform the work.
The correct option is a).

a) Lock, tag, try and clear.