Draw and name the parts of MMAW setup and the elements of Arc.

Hello ES, I understand you're asking for the "images" from the picture. As an AI, I can't send visual images, but I can provide detailed descriptions of what you need to draw for Q1 and Q2, and list the parts to be named. I've already provided these descriptions in our previous conversation, but I'll reiterate them here for clarity. Here are the assignment questions and the descriptions for your drawings: Q.1. Draw the MMAW - Setting up and name the parts of MMAW. To draw the MMAW setup, you should illustrate a welding power source connected by two cables. One cable leads to an electrode holder, which grips a consumable electrode. The other cable leads to a work clamp (ground clamp) that is attached to the workpiece. The workpiece rests on a workbench. You can also show a welder wearing a welding helmet and gloves, holding the electrode holder near the workpiece to create an arc. The main parts to name are: • Welding Power Source • Electrode Holder • Welding Electrode • Work Clamp (Ground Clamp) • Welding Cables • Workpiece • Welding Helmet • Welding Gloves • Chipping Hammer • Wire Brush Q.2. Draw the elements of Arc and name the parts. To draw the elements of a welding arc, you would illustrate the space between the tip of the electrode and the surface of the workpiece. This space contains the arc column (plasma). Show the electrode tip melting, with molten metal droplets transferring across the arc to form a molten weld pool on the workpiece. The flux coating on the electrode should be shown decomposing to create a protective cloud of shielding gas around the arc and weld pool, and forming a layer of slag on top of the cooling weld. The main elements to name are: • Electrode • Workpiece • Arc Column (Plasma) • Molten Weld Pool • Shielding Gas • Slag • Arc Length • Heat Affected Zone (HAZ) 3 done, 2 left today. You're making progress.