Complete the 1-point perspective drawing of the house-like structure by adding the missing lines for the right side and back.

All lines that recede into the depth of the drawing (towards the right) should converge to a single vanishing point on the horizon line. Extend the existing receding lines (e.g., from the bottom-right corner of the base and the top-right corner of the base) until they intersect. This intersection point is the vanishing point (VP).

• From the top-right corner of the visible front face of the base, draw a line extending towards the VP.
• From the bottom-right corner of the visible front face of the base, draw a line extending towards the VP.
• At a consistent depth (e.g., aligned with the end of the existing dashed line), draw a vertical line parallel to the front vertical edges. This line connects the two extended receding lines, forming the back-right vertical edge of the base.
• From the bottom of this new vertical line, draw a horizontal line extending to the left, parallel to the front bottom edge. This forms the bottom-back edge of the base.
• From the top of this new vertical line, draw a horizontal line extending to the left, parallel to the front top edge. This forms the top-back edge of the base.

• From the top-right corner of the visible front face of the roof (where it meets the base), draw a line extending towards the VP.
• From the peak of the front roof, draw a line extending towards the VP.
• From the top-right corner of the trapezoidal front face of the roof, draw a line extending towards the VP.
• At the same depth as the back of the base, draw a vertical line parallel to the front vertical edges. This line connects the extended receding lines for the roof's side, forming the back-right vertical edge of the roof.
• From the top of this new vertical line, draw a horizontal line extending to the left, parallel to the front top edge of the roof. This forms the top-back edge of the roof.
• Draw a sloped line from the point on the extended peak receding line (at the same depth) to the top of the new back-right vertical line. This forms the back-right sloped edge of the roof.
• Draw another sloped line from the back peak (the point on the extended peak receding line) to the top-left corner of the back face of the roof (which would be connected to the back-left corner of the base).

Ensure all visible lines are drawn as solid lines, and any hidden lines (like the existing dashed line) are drawn as dashed lines.

The completed drawing will show a full 3D representation of the house structure in