Describe the steps and properties evaluated for manufacturing mugs using soda feldspar via dry and wet methods.

Process 1: Dry Method

1. Soda Feldspar is processed using a Dry method.
2. This yields 2 kg Body from SW R.K (likely referring to a specific type or source of ceramic body material).
3. This body is then used for Casting Mugs.
4. The final mugs are evaluated based on the following properties:
   • Casting time
   • Casting thickness
   • Shrinkage
   • Dimension
   • WA (Water Absorption)
   • AP (Apparent Porosity)
   • Appearance
   • Whiteness

Process 2: Wet Method

1. Soda Feldspar is processed using a Wet method.
2. Following the wet process, the subsequent steps are implied to be the same as the dry method, leading to:
   • A 2 kg Body from SW R.K.
   • Casting Mugs.
3. The final mugs are also evaluated based on the same set of properties as the dry method:
   • Casting time
   • Casting thickness
   • Shrinkage
   • Dimension
   • WA (Water Absorption)
   • AP (Apparent Porosity)
   • Appearance
   • Whiteness