We read your photo as:
Ampere Scale: Displays the welding current setting.
English
ScanSolve AI Answer
Here are the names of the parts indicated on the welding machine:
- Ampere Scale: Displays the welding current setting.
- Adjustment Crank: Used to fine-tune the welding current.
- Low Range Tap: An output terminal for lower current ranges.
- Work Lead Tap: The terminal where the work clamp (ground) cable is connected.
- High Range Tap: An output terminal for higher current ranges.
- Off-On Switch: Controls the power supply to the welding machine.
Was this helpful?
Still stuck on this one?
Ask a follow-up, and the answer starts from this question.
Got a different question?Ask your own question
More English Questions
QWhat are the labeled parts of this Manual Metal Arc Welding (MMAW) diagram?QA moving-coil instrument with a resistance of 5 and a full-scale deflection current of 20 mA is to…QThe symbol below shows the use of what type of weld?QDraw the circuit diagram of your chosen scale model/prototype. Refer to Worksheet 34 (Informal)QGiven resistance R = 12.5 and current I = 10 A.
Handwritten Step-by-Step Solution
Get this as a handwritten image on WhatsApp — like a tutor wrote it for you.
Try on WhatsApp