Give the table of values

Here is the table of values for your experiment. You will need to fill in the measured diameters, the calculated ratio $r$, and then the current and voltage readings after conducting the experiment.

Initial Measurements and Calculation:

• Diameter of wire A, $d_A$:
• Diameter of wire B, $d_B$:
• Ratio $r = \left(\frac{d_A}{d_B}\right)^2$:

Table of Current and Voltage Readings:

$$\begin{array}{|c|c|c|c|c|} \hline \text{Reading No.} & I_A \text{ (A)} & V_A \text{ (V)} & I_B \text{ (A)} & V_B \text{ (V)} \\ \hline 1 & & & & \\ 2 & & & & \\ 3 & & & & \\ 4 & & & & \\ 5 & & & & \\ 6 & & & & \\ \hline \end{array}$$