Create a detailed dimensional breakdown of a piece of furniture based on provided elevations and plan views.

This drawing illustrates a piece of furniture, likely a small cabinet or shelving unit, with a flat top surface. It features an open front or two narrow doors, and internal shelves visible from the side. Step 1: State the overall dimensions of the furniture piece. • Overall Height: The total height of the unit is 700 mm, as indicated in both the Front Elevation and End Elevation. • Overall Length (Front View Width): The overall length (width from the front) of the main body is 400 mm, shown in the Front Elevation and Plan view. • Overall Depth (Side View Width): There is an inconsistency in the provided dimensions for the overall depth. • The Plan view indicates an overall depth of 585 mm. • The End Elevation indicates an overall depth of 530 mm. Step 2: Detail internal and specific dimensions. • Internal Shelves (from End Elevation): • The first shelf is positioned 350 mm from the bottom of the unit. • The second shelf is 150 mm above the first shelf. • Front Panel Details (from Front Elevation): • The front view shows two vertical elements, each 65 mm wide, separated by a central gap of 120 mm. • Plan View Internal Details: • The plan view indicates internal structural elements or partitions at 100 mm and 200 mm from the front edge, and an internal depth of 550 mm. The furniture unit has an overall height of 700 mm and a length of 400 mm. The depth is either 585 mm (Plan view) or 530 mm (End Elevation). It features internal shelves at 350 mm and