A galvanometer of ImA and 20ohms want to be use to measure current of 2A as an armeter and as voltmeter to measure the potentiometer of 20v Determine suitable resistor as ammeter of 2A 1 as ammeter of 20Amp 2 as voltmeter of 20v
Electrical Engineering
ScanSolve AI Answer
Question 1: What resistor is suitable for the galvanometer to function as an ammeter for 2A?
To measure 2A, a shunt resistor of approximately 10 ohms is needed in parallel with the galvanometer.
Question 2: What resistor is suitable for the galvanometer to function as an ammeter for 20A?
To measure 20A, a shunt resistor of approximately 0.95 ohms is needed in parallel with the galvanometer.
Question 3: What resistor is suitable for the galvanometer to function as a voltmeter for 20V?
To measure 20V, a series resistor of approximately 980 ohms is needed with the galvanometer.
Was this helpful?
Still stuck on this one?
Ask a follow-up, and the answer starts from this question.
Got a different question?Ask your own question
More Electrical Engineering Questions
QHow do you convert a galvanometer into an ammeter and calculate the shunt resistance needed for a…QA moving coil galvanometer with an internal resistance of 5 Ω has a full scale deflection when a…QA moving-coil instrument with a resistance of 5 and a full-scale deflection current of 20 mA is to…QA 10.-ohm resistor and a 20.-ohm resistor are connected in series to a voltage source. When the…QTake the ammeter and voltmeter readings as shown in the circuit diagram. Record your results in the…